
CME-45C Track Carrier Auger Drill
Deutz 197 cubic inch [3.2L] 57 Horsepower [42.5 kilowatt] air-cooled 3 cylinder diesel engine.
-
- Track Width
- 12.6 in [32 cm]
- Avg. ground bearing pressure
- 5.4 psi [.379 kg/cm2]
- Optional Track Width
- 17.7 in [45 cm]
- Avg. ground bearing pressure
- 3.9 psi [.270 kg/cm2]
- Suspension
- Triple walking beams
- Turning Radius
- In place
- Drive
- Hydraulic motor/planetary wheel drives
- Optional 2 Speed drive
- Low Speed: 0-1mph
- High Speed: 0-2mph
- Steering
- Remote radio controlled guidance
- Hydraulic front winch
- 12,000 lbs [5,443 kg]
- Auger and rod racks
- Standard
- Tool boxes
- Standard
- Track Width
- Straight ahead climb
- 46% grade
- Side-hill traverse
- 36% grade
-
- Standard
- Rotary Torque
- 3,395 foot pounds [4,603 Nm]
- Rotary Speed
- up to 643 rpm max
- Rotary Torque
- High torque
- Rotary Torque
- 4,815 foot pounds [6,528 Nm]
- Rotary Speed
- up to 453 rpm max
- Rotary Torque
- High speed
- Rotary Torque
- 3,115 foot pounds [4,223 Nm]
- Rotary Speed
- up to 700 rpm max
- Rotary Torque
- Clutch, heavy duty
- 13 inch [33 cm]
- Transmission
- 4 speed forward, 1 speed reverse
- Standard
-
- Retract force
- 19,600 pounds [8,891 kg]
- Pulldown force
- 13,650 pounds [6,192 kg]
- Retract rate (max)
- 55 feet [17 m] per minute
- Feed Rate (max)
- 79 feet [24 m] per minute
- Stroke
- 68 inch [173 cm]
- Retract force
Four hydraulic jacks, inverted design with chrome-plated piston rods enclosed at all times.
- Stroke
- 36 inch [91.4 cm]